Cementing

A precipitated silica based powder that should be added to the cement or bulk material before adding any additives. Usual product application is 0.03% to 0.18% by weight of bulk material. Comes in 200 lb. drums or 20 lb. pails.

Contact us for more information.

A polysaccharide in a mineral oil with surfactant-suspension package. Usual application requires 0.5 to 1.0% by weight of cement and, or spacer.

Contact us for more information.

A complex copolymer (without naphthalene sulfonates), as an effective dispersant/friction reducer for fresh and salt water low to high density cement slurries.Usual application is between 0.25 lbs. /sack to 0.75 lbs. /sack cement. Product to be labeled as to customer's specification in a 50 lb. bag.

Contact us for more information.

A liquid version of Crim-C-3.
Usual application is 10 gallons to 20 gallons product per 10 bbls. of mixing water. Product comes in pails, drums, or totes, labeled as to customer's specification.

Contact us for more information.

A naphthalene sulfonated copolymer as an effective dispersant/friction reducer for fresh and salt water (max 16%) low density cement slurries. Usual application is from 0.5 lb. /sack to 1.5 lb. /sack cement. Product comes in 50 lb. bag, labeled as to customer's specification.

Contact us for more information.

A liquid version of Crim-D-2.
Usual application is 15 gallons/25 gallons product per 10 bbls. of mixing water. Product comes in pails, drums, or totes and labeled as to customer's specification.

Contact us for more information.

Adjustable Spacer A polymer and silica based low viscosity spacer base product that can be adjusted and matched with a surfactant selection to meet well bore and water based drilling fluid needs.
Usual application is 0.2% to 1.0% by required weight.

Contact us for more information.

Dual Spacer A polymer with various silica forms to provide the spacer and wash characteristics required to separate oil base or water based drilling fluids and scour the well bore and casing walls.
Usual application is 0.2% to 1.0% by required weight.

Contact us for more information.

A high molecular weight cellulose derived suspension additive for cement slurries. It aids in the prevention of solid settling while assisting in the control of free-water leak-off. Usual application is 0.2% to 1.0% by weight of cement.

Contact us for more information.

Polymer Defoamer Liquid, linear polymer in a high purity solvent anti-foamer.

Contact us for more information.

Alcohol Defoamer Liquid, fatty alcohol based ant-foamer.

Contact us for more information.

Silicon Defoamer Liquid, silicon emulsion based antifoamer
Note: Usual application ranges from 0.003 - 0.5 % by weight of cement.
Product available in totes, drums, and pails.

Contact us for more information.